welcome: please sign in

Upload page content

You can upload content for the page named below. If you change the page name, you can also upload content for another page. If the page name is empty, we derive the page name from the file name.

File to load page content from
Page name
Comment
Enter the first 6 digits of Pi.

Revision 2 as of 2013-05-25 17:13:03

location: MidiVamp2

MIDI Vampire-II

About the MIDI Vampire-II

MIDI Vampire-II (Vamp2) is the next logical extension from Vamp1. You have a synth, now you need a drum machine. And just as Vamp1, Vamp2 is also phantom powered from the MIDI data line, so no batteries are needed.

Vamp2 is a 4 voice drum synthesizer, with 8b, 31.25ksps PWM sound generation, and independent outputs for each voice. The output is sent to 2 stereo 1/8" jacks. If only 1 jack is used, 2 sounds will be mixed on each channel. Depending upon which jack you choose, you can get a different stereo mix. Vamp2 gives control over attack, decay, release, wavetable selection, and has FM, bitcrusher, and frequency sweep effects. It also has comb-filtered noise source with swept resonance, and controllable cutoff frequency.

Firmware

If you want to modify your Vamp, there are plenty of fun things to do. You can put in your own wavetables, or modify the frequency ranges pretty easily. These are just done with lookup tables that can be swapped out. The code itself is written in AVR assembly, which we apologize for, but it was the only way to get so much into such a small space. We have some Pure Data wavetable creators that you can use to take .wav files and convert them into assembly lookup tables. You can also generate sounds within Pure Data and make wavetables from those as well.

Documentation

Files: Version 1.0